|
GF-3020 CDMA Router
Overview
2.5G mobile communication technology (GPRS/CDMA 1x) has become widely used of industrials and utilities in recent years and many customers are seeking reliable, flexible and cost-effective data channel to build their information system. Many applications such as ATM, POS, SCADA and surveillance system will require data channels covered all country; this brings a bright future for GPRS and CDMA 1x data networks applications.
Requirements towards information system are varied because of different features of numerous industrial applications. Mobile telecom service providers are required to provide industrial application solutions not only meeting common specifications and also individual special ones. Hence, garefowl co-operates with mobile service providers to design products and network configurations suitable to industrial end users' individualized applications. Garefowl has developed embedded, advanced and reliable GF Series (GPRS/CDMA 1x) router for the applications.
GPRS network theoretically can provide a maximum bandwidth 171.2Kbps, actually; it works at 40~100Kbps bandwidth (it depends on service provider's operation policy). As we know, GPRS is packet based network which provides TCP/IP communication channel.
Same as GPRS network, CDMA 1x network can provide a maximum bandwidth up to 300Kb/s and actual transmitting and receiving bandwidth reaches 100Kb/s.
Since Garefowl has many years experience of mobile data communication, it proves that Garefowl products are widely applied and work stably.
GF Series router is a dedicated ideal data transmission channel for industrial applications. It can be operated at GPRS or CDMA 1x network by selecting a different radio module.
Features Functions
|
1)Non host support |
Normally, GPRS or CDMA 1x Modem can be connected to a PC, and then dial an access number manually; it utilizes the PC resources to process the data transmission and protocol conversion. GF Series router is an embedded platform built-in with a processor, RTOS, protocol stack and application software. It works automatically without host PC. |
|
2)Always online |
GF Series Router will automatically attach to GPRS or CDMA 1x network
when it is powered on, and then setup a transmission channel. |
|
3) Toll on traffic
|
GF Series Router can be configured to work always online; it is charged
according to traffic. |
|
4)High speed |
Maximum GPRS bandwidth can be 171.2kb/s,only 40~100kb/s can be reached at actual application. Maximum CDMA 1x network bandwidth can be 300kbps.However, the bandwidth will depends the operator's policy. For example, it is only 80~100kbps bandwidth at China Unicom CDMA 1x network..
|
|
5)Routing and NAT functions
|
GF Series router provides routing table and NAT function; it is an ideal solution for branch office connection or SOHO application. |
|
6)Simple and flexible to use
|
GF Series router is a powerful and easy to used device. It is easy to build your own private mobile data network. |
Basic Functions
• Ease to use, reliable and flexible
• Support dual band GPRS or CDMA 1x network
• Always online
• Real clock
Enhanced Functions
• Self-diagnostic and alarm output
• EMC/EMI design
Professional Functions
• Built-in DHCP server
• Firewall and NAT
• Support DMZ host
• Support Dynamic DNS
• Support packet filtering
• Support multiple protocol
conversion
• Support data center communication
• Transparent data transmission
• Support virtual private data network
• Online detection and redial
• Ethernet or RS-232 interface
Specifications
CDMA 1X Data
• Tri-Band Cellular (450M/800 M/1900MHZ)
• Support IS 707 data service
• Support 153kbps packet data
• Support Class 2.0 Group 3 facsimile
• Complied with IS-95A, IS-95B CDMA interface
Interface
• Antenna: 50ohm/SMA/Female
• UIM/SIM card: 3V
• Serial data interface: RS-232(DCE) or RS-485
Applications
• Support radio network data envelope counting
• WEB/Telnet management interface
• Local/remote firmware upgrade
• Local/remote profiles backup and retrieve
• Urgent event alarm via SMS
• Serial data rate: 300 to 115,200 bits/s
• Ethernet: 10/100BaseT/RJ45
• Configuration interface: WEB/RS-232
• Alarm output interface: TTL
Power Supply
• Voltage: +9VDC(+5V~25VDC Optional)
• Power consumption Max. current: 430mA@+5VDC Idle: 22mA@+5VDC
Others
• Mechanical: 59x100x23 (not include antenna)
• Weight: 180g
• Operation temperature: -30~+70ºC
• Related humidity:95%(non-condensing)
GF Series router is a universal communication device for industries and utilities. It adapts to all applications that require medium and low rate data communication, such as power distribution network, running water, gas pipe, weather station, traffic control, POS and so on. It can also be used for corporate Internet access to extend LAN at remote site. GF Series router may be utilized at following applications.
• Utilities
Power distribution network supervision
Running water and gas pipe line supervision
Central heating system supervision
Weather station data transmission
Hydrologic data acquisition
• Finance
POS data transmission
Vending machine
ATM
• Securities Police and traffic control
Policy
Traffic info guidance
Parking meter
• Industry Telecom equipment supervision (Mobile base station, microwave or optical relay station)
Oil field data acquisition
Warehouse supervision
Taxi
Reletive Documents
GF-2006_User_Mauual_Eng
Software
TCP test Application
UDP test Application
|
